Schedule - GDC STANDALONE INTEGRATED MEDIA BLOCK SR-1000 User Manual

5. AUTOMATION
1 [Quick Mode Label]
2 [Send Automation Cue]
3 [Projector Quick Setup]

5.2 Schedule

This tab is used to schedule automation cues to execute at the specified date and time.
1
User Manual for SR-1000 Standalone Integrated Media Block™
An automation label can be configured to be easily triggered here.
This label can be set in Automation
(Refer to Section 5.6)
Click the Execute button to execute the automation cue.
This section is used to manually execute a configured automation
label.
Select a label and click the
automation label manually.
This section is used to manually send an automation command
to a configured projector.
Select the projector primitive or macro to be executed and click
the Execute button to send the command to the projector.
Figure 14: Scheduling Cues
- 24 -
→
Option tab.
Execute button to execute the
2
th
September 15 , 2019