Sensor - GDC STANDALONE INTEGRATED MEDIA BLOCK SR-1000 User Manual

7. CONFIGURATION
[RAID Device missing and
3
degraded status]
4
[Mount Data Storage]
5
[Mount Capacity Threshold
(for data in %)]
[Send detailed S.M.A.R.T.
6
traps]
1
User Manual for SR-1000 Standalone Integrated Media Block™
Check RAID Device missing and degraded status
Trap.
Note: When Trap is On, a trap will be sent if the RAID Device is
missing or degraded.
Check Mount Data Storage
Note: When Trap is On, a trap will be sent if the data storage is
not mounted on the system.
Set the mount capacity threshold value for data (in percentage)
Note: When Trap is On, a trap will be sent if the mount capacity
threshold value is reached.
Enables the sending of SNMP traps when specific hard disk
S.M.A.R.T. attributes change

7.1.1.6 Sensor

Figure 43:SNMP Configuration - Sensor
to activate the
to activate the Trap.
- 63 -
th
September 15 , 2019