Restoring Serial Port Settings; Ns-Link Com Port; Socket Port - Comtrol DeviceMaster DM-2000 Series Installation And Configuration Manual

Managing the DeviceMaster

Restoring Serial Port Settings

Use the web page and/or the NS-Link device driver for Windows to restore the serial port settings to their
default values.
The NS-Link serial port settings are independent of the socket serial port settings on the web page. If you are
using COM ports and also have configured the port for socket services, you must restore the default port
settings in the driver and web page.

NS-Link COM Port

You can use this procedure to reset NS-Link serial port settings.
1. Open the Driver Management Console using Comtrol > DeviceMaster Driver Management Console.
2. Highlight the first port that you want reset to default values.
3. Click the Defaults button (and if appropriate, Clone).
4. Click Apply or Ok.
If necessary, you can reset DeviceMaster device properties to their defaults on the Device General tab using
the Defaults button.

Socket Port

Use the following procedure to reset the socket port serial settings.
1. Open the DeviceMaster web page (Accessing Socket Configuration on Page 63).
2. Click System | Restore Defaults.
3. Click the Port Settings (including RFC1006) option and then click Restore.
120 - Managing the DeviceMaster DeviceMaster Installation and Configuration Guide: 2000594 Rev. F