PRAESENSA
11.5.11
Reset to factory default
The reset switch resets the device to its factory default settings. This function is only to be
used in case a secured device is removed from a system to become part of another system.
See Device status and reset, page 51.
11.6
Approvals
Emergency standard certifications
Europe
International
Regulatory areas
Safety
Immunity
Emissions
Conformity declarations
Europe
Environment
Bosch Security Systems B.V.
Multifunction power supply, large | PRA-MPS3 | en 125
EN 54‑16
EN 54‑4
ISO 7240‑16
ISO 7240‑4
EN/IEC/CSA/UL 62368‑1
EN 55024
EN 55103‑2 (E1, E2, E3)
EN 50130‑4
EN 55032
EN 61000-3-2
EN 61000-3-3
EN 61000‑6‑3
ICES‑003
ANSI C63.4
FCC‑47 part 15B class A
CE/CPR
RoHS
Installation manual
2019.11 | V1.00 |