Ethernet Network - Bosch PRAESENSA Installation Manual

136 en | LCD call station | PRA-CSLD, PRA-CSLW
12.5.4

Ethernet network

The network must be set up in such a way that the call station can be discovered and reached
by the system controller. Configuration of the call station and its extensions is done via the
system controller. For configuration, the call station is identified by its hostname, which is
printed on the product label on the bottom of the device. The format of the hostname is the
type number of the device without the dash, followed by a dash and then the last 6
hexadecimal digits of its MAC‑address.
Configuration is described in the PRAESENSA configuration manual.
2019.11 | V1.00 | Installation manual
PRAESENSA
Bosch Security Systems B.V.