Installation; Parts Included - Bosch PRAESENSA Installation Manual

156 en | Ethernet switch | PRA-ES8P2S
Top panel connections
PWR2
14.5

Installation

The PRA-ES8P2S is a preconfigured version of the Ethernet switch Advantech
EKI‑7710G‑2CPI‑AE. Detailed installation and configuration instructions can be downloaded
from the manufacturer's website: www.advantech.com.
The switch can be mounted on a DIN‑rail or on a wall or panel, using the wall mounting
brackets.
Notice!
For security reasons, change the factory default password of the switch.
Notice!
PRAESENSA supervises the network links between OMNEO devices, but a link between two
non‑OMNEO devices is not supervised. The PRA-ES8P2S is not a native OMNEO device and a
connection between two of these switches is not supervised.
14.5.1

Parts included

The box contains the following parts:
Quantity
1
1
2
1
1
1
No tools or Ethernet cables are provided with the device.
2019.11 | V1.00 |
Chassis ground
24 to 48 VDC input 2
Component
10‑port industrial Ethernet switch
Screw connector
Wall-mounting bracket
DIN‑rail mounting bracket and screws
Startup manual
EKI Device Configuration Utility CD ROM
Installation manual
PWR1 24 to 48 VDC input 1
P‑Fail Fault relay
PRAESENSA
Bosch Security Systems B.V.