Canon DR-1210C Service Manual page 72

CHAPTER 4 INSTALLATION & MAINTENANCE
5. Scanning
Using the job function, check the op-
eration first. "Easy Start Guide" explains
feeder scanning by use of the [FILE] button.
1) Thoroughly fan the pages of the docu-
ment.
Figure 4-125
2) Place the document in the feeder and
adjust the document guide adapters.
Figure 4-126
4-8
3) Press the [FILE] button.
Scanner starts scanning.
Note: After the power is turned on, the
Press the [FILE] button, and the display
panel shows the scanner states one by
one.
Scanning and data sending should be in
the default conditions.
condition is "black and white with 300 dpi"
and the directory of file storage is "\My
Document\My Pictures". The file is in the
PDF format, having a file name consisting
of a 17-digit number that represents the
date and time of scanning.
4) When "Sending complete." appears on the
display, the scanning operation completes.
Check the saved image.
5) If necessary, repeat scanning of the image
in other conditions to check the results.
COPYRIGHT © 2006 CANON ELECTRONICS INC.
scanner takes more time than usual
for warming up of the fluorescent lamp,
etc. before getting ready for scanning
operation for the first time.
Figure 4-127
CANON DR-1210C FIRST EDITION FEB. 2006
The scanning