Canon DR-1210C Service Manual page 56

CHAPTER 3 DISASSEMBLY & ASSEMBLY
2) Peel off the release papers from the ad-
hesive tapes on the pressure board
Place the pressure board on the reading
glass, aligning it with a "positioning mark"
.
2
Figure 3-218
Figure 3-219
3) Slowly close the feeder. Then lightly press
it to stick the pressure board.
3-10
6. Hinges
. 1) Remove the ADF bottom cover.
1
2) Remove the 2 screws
remove the hinge (left)
Remove the 2 screws
self-tapping) and remove the hinge (right)
4
Note: The right and left hinges are the same
COPYRIGHT © 2006 CANON ELECTRONICS INC.
.
Figure 3-220
parts.
CANON DR-1210C FIRST EDITION FEB. 2006
(M4 × L6) and
1
.
2
(M4 × L8,
3