Canon DR-1210C Service Manual page 49

3) Lift the front side of pickup tray
Then slide it forward. Unhook the 2 fitting
parts on the other side and remove the
2
pickup tray.
Figure 3-204
Note: When assembling, hook the 2 fitting
parts on the other side first.
COPYRIGHT © 2006 CANON ELECTRONICS INC.
4. Cover Stopper
a little.
1
1) Open the feeder cover
2) While slanting, unhook the fitting parts
Note: Other parts can be disassembled in this
CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 3 DISASSEMBLY & ASSEMBLY
Figure 3-205
on the ADF upper cover side.
state. Take the following procedure to
remove the cover stopper.
Figure 3-206
.
1
1
3-3