6) Remove the 2 screws
self-tapping) on the other side. Slowly lift
up the feed unit
move it.
Figure 3-226
7) Remove the 2 screws
draw the feed motor
Then fit the motor gear to hole
remove the feed motor.
Figure 3-227
COPYRIGHT © 2006 CANON ELECTRONICS INC.
(M3 × L6,
1
(with motor) and re-
2
1
(M3 x L4) and
a little forward.
2
3
and
CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 3 DISASSEMBLY & ASSEMBLY
8) Remove the roller unit
tion pad
.
2
Note: The feed unit (service part) does not
include the feed motor, the roller unit
and the separation pad.
Figure 3-228
Note: When reassembling the feed unit, it
must be positioned at the correct place
and there must be no clearance. In
addition, lay the cable in the groove in
the cover to avoid it from being caught.
and the separa-
1
3-13