Canon DR-1210C Service Manual page 47

I. OVERALL FLOWCHART
The overall flow of disassembly is
shown below by the part.
* The numbers attached to the
part names indicate the item
numbers described in
"II. PARTS PROCEDURES".
1. Feeder
2. Roller unit
2. Separation pad
COPYRIGHT © 2006 CANON ELECTRONICS INC.
* For the flatbed assembly, only
3. Pickup tray
5. ADF front cover
Figure 3-101
CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 3 DISASSEMBLY & ASSEMBLY
Main body
disassemble the operation
panel (except for disposal).
4. Cover stopper
5. ADF bottom
cover 5. Feeder cover
(pressure board)
6. Hinge
7. ADF PCB
8. Feed unit
Flatbed assembly
10. Operation
panel
9. Eject stopper
8. Feed motor
3-1