Installing The Software - Canon DR-1210C Service Manual

CHAPTER 4 INSTALLATION & MAINTENANCE

3. Installing the Software

Precautions
Install the software before connecting the
scanner to the computer.
Be sure to log on to the OS (Windows)
with administrator privileges.
Close all other applications before install-
ing the software.
Check the operating environment of the
computer system.
Unless the recommended conditions are
satisfied, such specifications as the scan-
ning speed may not be satisfied. Refer to
user manual for details.
* CPU: Pentium4 1.8 GHz or higher
* Memory: 256 MB or more
* HDD: Empty capacity of 1 GB or more
* Hi-Speed USB2.0 interface:
I/F supplied with computer as standard
or recommended product supplied by
Adaptec
* The OS must be one of those listed be-
low:
Windows 2000 Professional SP4 or later
Windows XP Professional SP2 or later
Windows XP Home Edition SP2 or later
1) Turn the computer power on.
Note: If the scanner is connected and the
computer power is turned on before
the software is installed, the following
wizard screen appears.
[Cancel] button to close the wizard.
Install the software before connecting
the scanner.
4-4
2) Insert the DR-1210C Setup Disc into the
CD drive. The setup wizard automatically
starts up.
Click the
COPYRIGHT © 2006 CANON ELECTRONICS INC.
Wizard Screen (Windows2000)
Figure 4-111
Figure 4-112
CANON DR-1210C FIRST EDITION FEB. 2006