Scrapping; Iii. Scrapping - Canon DR-1210C Service Manual

Appendix

III. SCRAPPING

When the product is discarded, it is re-
quired to remove the parts/units that contain
toxic substances. The fluorescent lamp in the
reading unit of this product contains mercury,
though slight amount.
removed in the procedures described below.
Refer to these procedures, in addition, if it
is required to separate the other parts of the
flatbed assembly for disposal.
Note: Once the outer cover and the internal
parts of the flatbed assembly are re-
moved, the quality cannot be assured
even if reassembled. Disassemble the
flatbed assembly except the operation
panel only when discarding the product.
Never disassemble it in ordinary ser-
vicing work.
1. Fluorescent Lamp
1) Remove the feeder
"CHAPTER3,
REASSEMBLY" for details.
Figure A-301
A-4
The lamp must be
. Refer to
1
DISASSEMBLY
COPYRIGHT © 2006 CANON ELECTRONICS INC.
2) Remove the 2 screws
insertion section.
3) Remove the 4 screws
side.
&
from the hinge
1
Figure A-302
on the bottom
1
Figure A-303
CANON DR-1210C FIRST EDITION FEB. 2006