Canon DR-1210C Service Manual page 55

3) Tighten the 2 screws
(M4 × L12, self-tapping), 4
screws
2
(M3 × L6, self-tapping) and 2
screws
3
(M3 × L10, self-tapping).
screws
4
Then stick the 4 screw head seals
Note: Use the correct screws in the correct
places. Be sure to stick the screw head
seals.
Figure 3-217
COPYRIGHT © 2006 CANON ELECTRONICS INC.
(M4 × L10), 2
1
.
5
CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 3 DISASSEMBLY & ASSEMBLY
Replacement procedures
The new pressure board is required to be
stuck on the ADF bottom cover to the cor-
rect position to fit the reading glass.
Therefore the ADF bottom cover assigned
as a service part does not have the pres-
sure board stuck on it. Prepare both and
stick the pressure board on the ADF bot-
tom cover according to the following pro-
cedures.
1) Assemble the ADF bottom cover before
sticking the pressure board on it.
Note: Be sure to stick the screw head seals.
3-9