NAiS FP0 Series Hardware Manual page 45

FP0
2.4.5 C32T/C32CT
Input
Output
(+)
. Notes
D The four COM terminals of input terminals (X0 - 7 and X8 - F) are
connected internally, however they should be externally
connected as well.
D The (+) terminals of output terminals (Y0 - 7) and output
terminals (Y8 - F) are connected internally, however they
should be externally connected as well.
D The ( - ) terminals of output terminals (Y0 - 7) and output
terminals (Y8 - F) are connected internally, however they
should be externally connected as well.
D (*1): Either positive or negative polarity is possible for the input
Matsushita Automation Controls
Input
(* Note 1)
Output
(+)
voltage supply.
Control Units
2.4
C32T/C32CT
X0 X1
COM
Y0 Y1
(+) ( - )
Pin Layouts
X8 X9
COM
Y8 Y9
(+) ( - )
2 - 25