NAiS FP0 Series Hardware Manual page 40

Control Units
2.3 Internal Circuit Diagram
When the load voltage differs from the 24 V DC external power supply for the
driving the internal circuit
Other than 24 V DC load voltage, 5 V DC and 12 V DC and other load voltages can be
connected.
FP0-C16T/C16CT/C32T/C32CT
Internal
circuit
Internal
circuit
Internal
circuit
Internal
circuit
Internal
circuit
Internal
circuit
. Notes
D (*1): The resistor in the control unit is 2 k• for X0 through X5,
D (*2): Either positive or negative polarity is possible for the input
2 - 20
Input side
X0
5.6 kΩ
(* Note 1)
5.6 kΩ
X1
(* Note
1)
5.6 kΩ
Xn
(* Note
1)
COM
Output side
(+)
Y0
Y1
Yn
(- )
and 1 k• for X6 through XF.
voltage supply.
Load (for 5 V )
Load (for 5 V )
Load (for 24 V )
Matsushita Automation Controls
FP0
24 V DC
(* Note 2)
24 V DC
(External
5V DC
power supply
(Rated load
for driving
voltage)
internal circuit)