NAiS FP0 Series Hardware Manual page 133

FP0
. Notes
D When removing the wire's insulation, be careful not to scratch
the core wire.
D Do not twist the wires to connect them.
D Do not solder the wires to connect them. The solder may
break due to vibration.
D After wiring, make sure stress is not applied to the wire.
D In the RS232C port terminal construction, if the wire closes
upon counter-clockwise rotation, the connection is faulty.
Disconnect the wire, check the terminal hole, and then
re-connect the wire.
Matsushita Automation Controls
Clockwise
CORRECT
Wire
7.9 Wiring the RS232C Port
Counter
clockwise
Wire
INCORRECT
Wiring
7 - 21