NAiS FP0 Series Hardware Manual page 39

FP0
2.3.2 Transistor Output Type
2.3.2.1 NPN Open Collector Type (C16T/C16CT/C32T/C32CT)
When the load voltage and external power supply are the same
This example is when the values of the rated load voltage and external power supply
for driving internal circuit are the same. In this situation, there is only one power supply.
FP0-C16T/C16CT/C32T/C32CT
Internal
circuit
Internal
circuit
Internal
circuit
Internal
circuit
. Notes
D (*1): The resistor in the control unit is 2 k• for X0 through X5,
D (*2): Either positive or negative polarity is possible for the
Matsushita Automation Controls
Input side
5.6 kΩ
X0
(* Note 1)
5.6 kΩ
Xn
(* Note 1)
COM
Output side
(+)
Load
Y0
Yn
(- )
24 V DC (External power supply and load voltage)
and 1 k• for X6 through XF.
input voltage supply.
24 V DC
(* Note 2)
Load
Control Units
2.3 Internal Circuit Diagram
2 - 19