NAiS FP0 Series Hardware Manual page 33

FP0
Item Item
Special PWM
functions u ct o s output output
function
(* Note
3)
. Notes
D (*1): When using the RS232C port for communication,
D (*2): The combinations 1 phase × 2 channels and 2 phases × 1
D (*3): For details and limitations on the high-speed counter, pulse
D (*4): The max. counting speed (10 kHz) is the counting speed
D (*5): If the unit is equipped with both reset inputs X0 and X1, X2
D (*6): With control unit's CPU that is Ver. 2.0 or a subsequent
Matsushita Automation Controls
Relay output type
C10RS/C10CRS
C10RM/C10CRM
Output point
——————
number
Output ——————
frequency
retransmission is recommended.
The driver IC for the RS232C port conforms completely to
EIA/TIA-232E and CCITT V. 28 standards.
channel are also possible for the high-speed counter.
output, and PWM output functions, see the * FP0 Program-
ming Manual.
with a rated input voltage of 24 VDC and an ambient
temperature of 25 C/77 F. The counting speed (frequency)
will decrease depending on the voltage and temperature.
serves as the reset input for X1. If X3 and X4 are used, X5
serves as the reset input for X4.
version, the frequency will be 0.15 Hz to 1 kHz.
2.2
Transistor output
type
C14RS/C14CRS C16T/C16CT
C14RM/C14CRM C16P/C16CP
Two points (Y0 and Y1)
Frequency: 0.15 Hz to 38
Hz (* Note 6)
Duty: 0.1% to 99.9%
Control Units
Specifications
C32T/C32CT
C32P/C32CP
2 - 13