Huawei S5700 Series Hardware Description page 90

S5700 Series Ethernet Switches
Hardware Description
Appearance and Structure
Figure 3-2 S5700-10P-LI-AC appearance
HUAWEI
PWR
SYS
STAT
SPED
MODE
1
3
5
7
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at
10/100/1000 Mbit/s, and must use
10/100/1000BASE-T Ethernet electrical port.
Table 3-5 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Connector type
Standards
compliance
Issue 24 (2016-08-12)
1 2 3 4
1 2 3 4 5 6 7 8
9 10
S5700-10P-LI-AC
~100-240V;50/60Hz;0.8A
5 6 7
Eight 10/100/1000BASE-T ports
One mini USB port
Ground screw
NOTE
It is used with a ground
Jack for AC terminal locking latch
NOTE
The AC terminal locking latch is not
delivered with the switch.
Description
RJ45
IEEE802.3, IEEE802.3u, IEEE802.3ab
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
CONSOLE
2
4
6
cable.
-
network cables.
Two 1000BASE-X ports
Applicable modules:
l GE optical module
l GE-CWDM optical module
l GE-DWDM optical module
l GE copper module (applicable in
V200R002C00 and later versions)
One console port
AC socket
NOTE
It is used with an AC power
-
Table 3-5 describes the attributes of a
3 Chassis
cable.
76