Huawei S5700 Series Hardware Description page 213

S5700 Series Ethernet Switches
Hardware Description
1
3
5
7
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at
10/100/1000 Mbit/s, and must use
10/100/1000BASE-T Ethernet electrical port.
Issue 24 (2016-08-12)
Forty-eight PoE+ 10/100/1000BASE-T
ports
One mini USB port
Ground screw
NOTE
It is used with a ground
Jack for AC terminal locking latch
NOTE
The AC terminal locking latch is not
delivered with the switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
4
6
cable.
8
network cables.
Four 10GE SFP+ ports
Applicable modules and cables:
l
GE optical module
l GE-CWDM optical module
l GE-DWDM optical module
l GE copper module
l 10GE SFP+ optical module
l 10GE-CWDM optical module
(applicable in V200R005C00 and
later versions)
l 1 m, 3 m, and 10 m SFP+ high-
speed copper cables
l 5 m SFP+ high-speed copper cable
(applicable in V200R009C00 and
later versions)
l 3 m and 10 m AOC cables
(applicable in V200R003C00 and
later versions)
One console port
RPS socket
NOTE
l It is used with an RPS cable
hot swappable.
l A PoE switch can have an RPS power
supply connected to this socket to
provide inputs for system power supply
and PoE power supply. The two inputs
are independent of each other. The RPS
power supply can also be used as a
backup of the system power supply when
it does not provide PoE power.
AC socket
NOTE
It is used with an AC power
Table 3-120 describes the attributes of a
3 Chassis
which is not
cable.
199