Huawei S5700 Series Hardware Description page 197

S5700 Series Ethernet Switches
Hardware Description
3
5
7
9
Port Description
100/1000BASE-X port
A 100/1000BASE-X port can send and receive data at 100 Mbit/s or 1000 Mbit/s.
3-104
Table 3-104 Attributes of a 100/1000BASE-X port
Attribute
Connector type
Optical interface
attributes
Standards
compliance
Working mode
Issue 24 (2016-08-12)
Four 10GE SFP+ ports
Applicable modules and cables:
l GE optical module
l GE-CWDM optical module
l GE-DWDM optical module
l
GE copper module
l
10GE SFP+ optical module
l 10GE-CWDM optical module
(applicable in V200R005C00 and
later versions)
l 1 m, 3 m, and 10 m SFP+ high-
speed copper cables
l 5 m SFP+ high-speed copper cable
(applicable in V200R009C00 and
later versions)
l 3 m and 10 m AOC cables
One console port
AC socket
NOTE
It is used with an AC power
Ground screw
NOTE
It is used with a ground
describes the attributes of a 100/1000BASE-X port.
Description
LC/PC
Depend on the optical module used
IEEE802.3z
100/1000 Mbit/s auto-sensing
Full-duplex
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
6
8
cable.
10 RPS socket
cable.
One mini USB port
One USB port
Jack for AC terminal locking latch
NOTE
The AC terminal locking latch is not
delivered with the switch.
NOTE
It is used with an RPS cable, which is not
hot swappable.
3 Chassis
Table
183