Huawei S5700 Series Hardware Description page 136

S5700 Series Ethernet Switches
Hardware Description
5
7
9
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at
10/100/1000 Mbit/s, and must use
10/100/1000BASE-T Ethernet electrical port.
Table 3-52 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Connector type
Standards
compliance
Working mode
Maximum
transmission
distance
1000BASE-X port
When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at
1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X
port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or
1000 Mbit/s.
Issue 24 (2016-08-12)
One console port
RPS socket
NOTE
l It is used with an RPS cable
hot swappable.
l A PoE switch can have an RPS power
supply connected to this socket to
provide inputs for system power supply
and PoE power supply. The two inputs
are independent of each other. The RPS
power supply can also be used as a
backup of the system power supply when
it does not provide PoE power.
AC socket
NOTE
It is used with an AC power
Description
RJ45
IEEE802.3, IEEE802.3u, IEEE802.3ab
10/100/1000 Mbit/s auto-sensing
Full-duplex
100 m
Table 3-53 describes the attributes of a 1000BASE-X Ethernet optical port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Ground screw
NOTE
It is used with a
8 Jack for AC terminal locking latch
NOTE
The AC terminal locking latch is not
which is not
delivered with the switch.
- -
cable.
network cables. Table 3-52
3 Chassis
ground cable.
describes the attributes of a
122