Huawei S5700 Series Hardware Description page 158

S5700 Series Ethernet Switches
Hardware Description
5
7
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at
10/100/1000 Mbit/s, and must use
10/100/1000BASE-T Ethernet electrical port.
Table 3-71 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Connector type
Standards
compliance
Working mode
Maximum
transmission
distance
10GE SFP+ port
A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and
receives service data at 1000 Mbit/s or 10 Gbit/s.
10GE SFP+ Ethernet optical port.
Table 3-72 Attributes of a 10GE SFP+ port
Attribute
Connector type
Optical port
attributes
Standards
compliance
Issue 24 (2016-08-12)
Ground screw
NOTE
It is used with a ground
DC power terminal
NOTE
It is used together with a
Description
RJ45
IEEE802.3, IEEE802.3u, IEEE802.3ab
10/100/1000 Mbit/s auto-sensing
Full-duplex
100 m
Description
LC/PC
Depend on the optical module used
IEEE802.3ae
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
cable.
-
DC Power Cable.
network cables.
Table 3-72
RPS socket
NOTE
It is used with an RPS cable, which is not
hot swappable.
-
Table 3-71 describes the attributes of a
describes the attributes of a
3 Chassis
144