Huawei S5700 Series Hardware Description page 232

S5700 Series Ethernet Switches
Hardware Description
Figure 3-51 Indicators on the S5700S-28P-LI-AC
3
Table 3-137 Description of indicators on the switch
Number
1
2
3
Issue 24 (2016-08-12)
2 1 7
HUAWEI
1 2 3 4 5 6
PWR
SYS
STAT
SPED
STCK
MODE
3 4 5
S5700S-28P-LI-AC
6
2 1 7
HUAWEI
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
PWR
SYS
STAT
SPED
STCK
4 5
MODE
S5700S-28P-LI-AC
6
Indicator/
Button
PWR: built-in
power module
indicator
SYS: system
status indicator
STAT: status
indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 9
7 8
7
16 17 18 19 20 21 22 23 24
25 26 27 28
Color
-
Green
Yellow
-
Green
Yellow
Red
Green
CONSOLE
8 9
CONSOLE
Description
Off: The switch is powered off.
Steady on: The switch is powered on.
Steady on: The built-in power module is
faulty, and the switch is powered by the
RPS system.
Off: The system is not running.
l Fast blinking: The system is starting.
l Slow blinking: The system is
operating properly.
Blinking: The system is in the sleep state.
NOTE
The system can wake from the sleeping state
if you press the MODE button.
Steady on: The system does not work
normally after registration, or a fan or
temperature alarm has been generated.
l Off: The status mode is not selected.
l Steady on: The status mode (default
mode) is selected. If the status mode
is selected, the service port indicator
shows the port link or activity state.
3 Chassis
218