Huawei S5700 Series Hardware Description page 204

S5700 Series Ethernet Switches
Hardware Description
Attribute
Maximum
transmission
distance
10GE SFP+ port
A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and
receives service data at 1000 Mbit/s or 10 Gbit/s.
10GE SFP+ Ethernet optical port.
Table 3-111 Attributes of a 10GE SFP+ port
Attribute
Connector type
Optical port
attributes
Standards
compliance
Working mode
Console port
The console port is connected to a console for on-site configuration. The port must use a
console
details about the attributes of a console port, see
Table 3-112 Attributes of a console port
Attribute
Connector type
Standards
compliance
Working mode
Baud rate
Mini USB port
Issue 24 (2016-08-12)
Description
100 m
Description
LC/PC
Depend on the optical module used
IEEE802.3ae
GE/10GE auto-sensing
Full-duplex
cable. The console port is used when a switch is powered on for the first time. For
Description
RJ45
RS-232
Duplex Universal Asynchronous Receiver/Transmitter (UART)
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 3-111 describes the attributes of a
Table 3-112.
3 Chassis
190