Huawei S5700 Series Hardware Description page 149

S5700 Series Ethernet Switches
Hardware Description
The mini USB port is connected to a console for on-site configuration. When both the Mini
USB and console port have a cable connected, only the Mini USB port works.
Indicator Description
Figure 3-25 Indicators on the S5700-28X-LI-AC
3
4
Table 3-67 Description of indicators on the switch
Numbe
r
1
2
Issue 24 (2016-08-12)
NOTE
In V200R007 and later versions, you can hold down the mode switch button for 6s and release it to start
the web initial login mode. Either of the following situations will occur:
l
If the switch has no configuration file, the system attempts to enter the web initial login mode. In
this mode, the status of mode indicators is as follows:
l If the system enters the web initial login mode successfully, all mode indicators turn green
and stay on for a maximum of 10 minutes.
l If the system fails to enter the initial login mode, all mode indicators fast blink for 10
seconds and then restore to the default status.
l If the switch has a configuration file, the system cannot enter the web initial login mode. In this
case, all mode indicators fast blink for 10s, and then return to the default states.
3 2 1 8
HUAWEI
1 2 3 4
PWR
RPS
SYS
STAT
SPED
STCK
4 5 6
MODE
S5700-28X-LI-AC
7
2 1 8
HUAWEI
1 2 3 4 5 6 7 8 9 10 11 12 13 14
PWR
RPS
SYS
STAT
SPED
STCK
5 6
MODE
S5700-28X-LI-AC
7
Indicator/
Button
PWR: internal
power supply
indicator
RPS: RPS
power supply
indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 10
5 6
8
15 16 17 18 19 20 21 22 23 24
1 2 3 4
Color
-
Green
Yellow
-
CONSOLE
9 10
CONSOLE
Description
Off: The switch is powered off.
Steady on: The switch is powered on.
Steady on: The built-in power module is
faulty, and the switch is powered by the
RPS system.
Off: No RPS is connected to the switch.
3 Chassis
135