Huawei S5700 Series Hardware Description page 241

S5700 Series Ethernet Switches
Hardware Description
Number
2
3
4
5
6
Issue 24 (2016-08-12)
Indicator/ Color
Button
RPS: RPS -
power supply
Green
indicator
Yellow
SYS: system -
status indicator
Green
Red
STAT: status Green
indicator
SPED: speed Green
indicator
STCK: stack Green
indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Off: No RPS is connected to the switch.
l Steady on: The RPS is in cold backup
state or forced power-on state.
l Blinking: The RPS is providing power
for another device.
l Steady on: The RPS is in alarm state.
(No 870 W PoE power module is
available in the RPS1800 or the
RPS1800 cannot provide power
supply to the local switch at this
time.)
l Blinking: The RPS is providing power
for the switch and the built-in power
module of the switch is faulty.
Off: The system is not running.
l Fast blinking: The system is starting.
l Slow blinking: The system is running
normally.
Steady on: The system does not work
normally after registration, or a fan or
temperature alarm has been generated.
l Off: The status mode is not selected.
l Steady on: The status mode (default
mode) is selected. If the status mode
is selected, the service port indicator
shows the port link or activity state.
l Off: The speed mode is not selected.
l Steady on: The speed mode is
selected. If the speed mode is
selected, the service port indicator
shows the port speed state. After 45
seconds, the service port indicators
automatically restore to the status
mode.
If you are not changing the indicator
mode (default):
l Off: The switch is in stack standby or
slave state or the stacking function is
not enabled on the switch.
l Blinking: The switch is a stack master
switch or a standalone switch with the
stacking function enabled.
3 Chassis
227