Huawei S5700 Series Hardware Description page 178

S5700 Series Ethernet Switches
Hardware Description
Table 3-88 Description of indicators on the switch
Numbe
r
1
2
3
Issue 24 (2016-08-12)
NOTE
The S5701-28X-LI-24S-AC, S5700-28X-LI-24S-AC, and S5700-28X-LI-24S-DC have air holes above
the 24 optical ports for heat dissipation (numbered 11 in
ports are numbered 8 in Figure
Indicator/
Button
PWR: internal
power supply
indicator
RPS: RPS
power supply
indicator
SYS: system
status indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
3-33.
Color Description
- Off: The switch is powered off.
Green Steady on: The switch is powered on.
Yellow Steady on: The built-in power module is
faulty, and the switch is powered by the
RPS system.
- Off: No RPS is connected to the switch.
Green l Steady on: The RPS is in cold backup
state.
l Blinking: The RPS is providing power
for another device.
Yellow Blinking: The RPS is providing power
for the switch and the built-in power
module of the switch is faulty.
- Off: The system is not running.
Green l Fast blinking: The system is starting
or is copying the system software and
configuration file from a USB flash
drive during a USB-based upgrade.
l Slow blinking: The system is running
normally.
Yellow Blinking: The switch has restarted after a
successful upgrade using a USB flash
drive. You can remove the USB flash
drive from the switch.
Red l Steady on: The system does not work
normally after registration, or a fan or
temperature alarm has been generated.
l Blinking: The system cannot be
upgraded after a USB flash drive is
inserted. The USB-based upgrade
failed.
3-33). The indicators for the service
3 Chassis
164