Huawei S5700 Series Hardware Description page 110

S5700 Series Ethernet Switches
Hardware Description
Attribute
Working mode
Maximum
transmission
distance
1000BASE-X port
When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at
1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X
port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or
1000 Mbit/s.
Table 3-26 Attributes of a 1000BASE-X Ethernet optical port
Attribute
Connector type
Optical port
attributes
Standards
compliance
Working mode
Console port
The console port is connected to a console for on-site configuration. The port must use a
console
details about the attributes of a console port, see
Table 3-27 Attributes of a console port
Attribute
Connector type
Standards
compliance
Working mode
Baud rate
Mini USB port
Issue 24 (2016-08-12)
Description
10/100/1000 Mbit/s auto-sensing
Full-duplex
100 m
Table 3-26 describes the attributes of a 1000BASE-X Ethernet optical port.
Description
LC/PC
Depend on the module used
IEEE802.3z
Full-duplex
cable. The console port is used when a switch is powered on for the first time. For
Description
RJ45
RS-232
Duplex Universal Asynchronous Receiver/Transmitter (UART)
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 3-27.
3 Chassis
96