Huawei S5700 Series Hardware Description page 165

S5700 Series Ethernet Switches
Hardware Description
Figure 3-30 Indicators on the S5700-28X-PWR-LI-AC
3
4
5
Table 3-79 Description of indicators on the switch
Number
1
2
3
Issue 24 (2016-08-12)
9
3 2 1
HUAWEI
1 2 3
PWR
RPS
4 SYS
STAT
SPED
STCK
PoE
MODE
S5700-28X-PWR-LI-AC
5 6 7
8
9
2 1
HUAWEI
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
PWR
RPS
SYS
STAT
SPED
STCK
PoE
MODE
S5700-28X-PWR-LI-AC
6 7
8
Indicator/
Button
PWR: internal
power supply
indicator
RPS: RPS
power supply
indicator
SYS: system
status indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
4 5 6 7
16 17 18 19 20 21 22 23 24
Color
-
Green
Yellow
-
Green
Yellow
-
Green
10 11
CONSOLE
1
2 3 4
9 10 11
CONSOLE
1
2 3 4
Description
Off: The switch is powered off.
Steady on: The switch is powered on.
Steady on: The built-in power module is
faulty, and the switch is powered by the
RPS system.
Off: No RPS is connected to the switch.
l Steady on: The RPS is in cold backup
state or forced power-on state.
l Blinking: The RPS is providing power
for another device.
l Steady on: The RPS is in alarm state.
(No 870 W PoE power module is
available in the RPS1800 or the
RPS1800 cannot provide power
supply to the local switch at this
time.)
l Blinking: The RPS is providing power
for the switch and the built-in power
module of the switch is faulty.
Off: The system is not running.
l Fast blinking: The system is starting.
l Slow blinking: The system is running
normally.
3 Chassis
151