Huawei S5700 Series Hardware Description page 159

S5700 Series Ethernet Switches
Hardware Description
Attribute
Working mode
Console port
The console port is connected to a console for on-site configuration. The port must use a
console
details about the attributes of a console port, see
Table 3-73 Attributes of a console port
Attribute
Connector type
Standards
compliance
Working mode
Baud rate
Mini USB port
The mini USB port is connected to a console for on-site configuration. When both the Mini
USB and console port have a cable connected, only the Mini USB port works.
Indicator Description
The S5700-28X-LI-DC have the same types of indicators as the S5700-28X-LI-AC. For
details, see
Power Supply Configuration
The S5700-28X-LI-DC has a built-in power module and does not support pluggable power
modules. It can connect to an RPS1800 power supply for power redundancy.
Figure 3-28
power module (PWR) receives DC power from an external power source and provides a 12 V
output to the chassis.
Issue 24 (2016-08-12)
Description
GE/10GE auto-sensing
Full-duplex
cable. The console port is used when a switch is powered on for the first time. For
Description
RJ45
RS-232
Duplex Universal Asynchronous Receiver/Transmitter (UART)
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
Indicator Description.
shows the power supply mode of a single DC power module. The built-in DC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 3-73.
3 Chassis
145