Huawei S5700 Series Hardware Description page 231

S5700 Series Ethernet Switches
Hardware Description
Attribute
Working mode
Console port
The console port is connected to a console for on-site configuration. The port must use a
console
details about the attributes of a console port, see
Table 3-136 Attributes of a console port
Attribute
Connector type
Standards
compliance
Working mode
Baud rate
Mini USB port
The mini USB port is connected to a console for on-site configuration. When both the Mini
USB and console port have a cable connected, only the Mini USB port works.
Indicator Description
Issue 24 (2016-08-12)
Description
Full-duplex
cable. The console port is used when a switch is powered on for the first time. For
Description
RJ45
RS-232
Duplex Universal Asynchronous Receiver/Transmitter (UART)
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
NOTE
In V200R007 and later versions, you can hold down the mode switch button for 6s and release it to start
the web initial login mode. Either of the following situations will occur:
l If the switch has no configuration file, the system attempts to enter the web initial login mode. In
this mode, the status of mode indicators is as follows:
l If the system enters the web initial login mode successfully, all mode indicators turn green
and stay on for a maximum of 10 minutes.
l If the system fails to enter the initial login mode, all mode indicators fast blink for 10
seconds and then restore to the default status.
l If the switch has a configuration file, the system cannot enter the web initial login mode. In this
case, all mode indicators fast blink for 10s, and then return to the default states.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 3-136.
3 Chassis
217