Huawei S5700 Series Hardware Description page 230

S5700 Series Ethernet Switches
Hardware Description
5
7
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at
10/100/1000 Mbit/s, and must use
10/100/1000BASE-T Ethernet electrical port.
Table 3-134 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Connector type
Standards
compliance
Working mode
Maximum
transmission
distance
1000BASE-X port
When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at
1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X
port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or
1000 Mbit/s.
Table 3-135 Attributes of a 1000BASE-X Ethernet optical port
Attribute
Connector type
Optical port
attributes
Standards
compliance
Issue 24 (2016-08-12)
Ground screw
NOTE
It is used with a ground
Jack for AC terminal locking latch
NOTE
The AC terminal locking latch is not
delivered with the switch.
Description
RJ45
IEEE802.3, IEEE802.3u, IEEE802.3ab
10/100/1000 Mbit/s auto-sensing
Full-duplex
100 m
Table 3-135 describes the attributes of a 1000BASE-X Ethernet optical port.
Description
LC/PC
Depend on the module used
IEEE802.3z
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
cable.
8
network cables.
RPS socket
NOTE
It is used with an RPS cable, which is not
hot swappable.
AC socket
NOTE
It is used with an AC power
Table 3-134 describes the attributes of a
3 Chassis
cable.
216