Huawei S5700 Series Hardware Description page 115

S5700 Series Ethernet Switches
Hardware Description
3
5
7
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at
10/100/1000 Mbit/s, and must use
10/100/1000BASE-T Ethernet electrical port.
Table 3-31 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Connector type
Standards
compliance
Working mode
Maximum
transmission
distance
1000BASE-X port
When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at
1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X
port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or
1000 Mbit/s.
Table 3-32 Attributes of a 1000BASE-X Ethernet optical port
Attribute
Connector type
Optical port
attributes
Issue 24 (2016-08-12)
One mini USB port
Ground screw
NOTE
It is used with a ground
Jack for AC terminal locking latch
NOTE
The AC terminal locking latch is not
delivered with the switch.
Description
RJ45
IEEE802.3, IEEE802.3u, IEEE802.3ab
10/100/1000 Mbit/s auto-sensing
Full-duplex
100 m
Table 3-32 describes the attributes of a 1000BASE-X Ethernet optical port.
Description
LC/PC
Depend on the module used
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
6
cable.
8
network cables.
One console port
RPS socket
NOTE
It is used with an RPS cable, which is not
hot swappable.
AC socket
NOTE
It is used with an AC power
Table 3-31 describes the attributes of a
3 Chassis
cable.
101