Huawei S5700 Series Hardware Description page 223

S5700 Series Ethernet Switches
Hardware Description
Table 3-130 Description of indicators on the switch
Numbe
r
1
2
3
4
Issue 24 (2016-08-12)
Indicator/ Color
Button
PWR: internal -
power supply
Green
indicator
Yellow
RPS: RPS -
power supply
Green
indicator
Yellow
SYS: system -
status indicator
Green
Yellow
Red
STAT: status Green
indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Off: The switch is powered off.
Steady on: The switch is powered on.
Steady on: The built-in power module is
faulty, and the switch is powered by the
RPS system.
Off: No RPS is connected to the switch.
l Steady on: The RPS is in cold backup
state.
l Blinking: The RPS is providing power
for another device.
Blinking: The RPS is providing power
for the switch and the built-in power
module of the switch is faulty.
Off: The system is not running.
l Fast blinking: The system is starting
or is copying the system software and
configuration file from a USB flash
drive during a USB-based upgrade.
l Slow blinking: The system is running
normally.
Blinking: The switch has restarted after a
successful upgrade using a USB flash
drive. You can remove the USB flash
drive from the switch.
l Steady on: The system does not work
normally after registration, or a fan or
temperature alarm has been generated.
l Blinking: The system cannot be
upgraded after a USB flash drive is
inserted. The USB-based upgrade
failed.
l Off: The status mode is not selected.
l Steady on: The status mode (default
mode) is selected. If the status mode
is selected, the service port indicator
shows the port link or activity state.
3 Chassis
209