Installation (Installing In The Base Unit) - Toshiba V Series Operation Manual

Chapter 4 Installation and Wiring

4.1 Installation (Installing in the Base Unit)

4
EN6 module
48
To install a module, insert it into the base unit along the module guide from the bottom of
the module as shown in figure 4-1. When it is in the base unit, fasten it with the screws
(M4) on top and bottom of the module.
EN6 module mounting slots
• Station bus 5-slot base unit: Slot Nos. S0 to S4
• Station bus 4-slot base unit: Slot Nos. S0 to S3
EB6 module mounting slot
The EB6 module can be mounted not only in a station bus slot but also an I/O slot or any
other slot.
Figure 4-1 Mounting Module in Base Unit
Base unit
model 2000 Ethernet Module Operation Manual