Toshiba V Series Operation Manual page 30

Chapter 3 Setting
3
18
Operation Mode
• Normal: The EN6 module is operated in standard condition.
• Download: Used for downloading firmware to the EN6 module program ROM
(flash PROM). This mode is set in upgrading the firmware version.
• Test Program: Used for operating the test program. Never use this mode.
IP Address Type
• Class B (General): Used for connecting an Ethernet of integrated controllers or a
general Ethernet.
• TOSDIC-CIE 1200: Used for connecting a TOSDIC-CIE 1200 Ethernet. (The system
operates according to the data set in the flash PROM.)
• Setting from Tool: Used for operating the EN6 modules with the network
parameters set from the Engineering tool.
Figure 3-3 Locations of Switches (EN611 to EN641, EN651, EN661)
operation mode setting switches
Station address (host ID) setting
switches
In the case of EN651, EN661.
model 2000 Ethernet Module Operation Manual