Ethernet Link Speed And Duplex Setting - Toshiba V Series Operation Manual

3.2 Network Parameter Setting
3.2.8

Ethernet link speed and duplex setting

Link speed and duplex are set to "Auto" at initial setting; they are configured properly by
auto-negotiation. But if auto-negotiation is not worked properly, this parameter can fix link
speed and duplex. The configurable pair is as follows. (This parameter is valid for EN651,
EN651A and EN661 only.)
• Auto (default)
3
• 10M half duplex
• 10M full duplex
• 100M half duplex
• 100M full duplex
The setting example of 100M half duplex is shown below.
43
6F8C0879