Toshiba V Series Operation Manual page 32

Chapter 3 Setting
3
20
IP address setting
Set network parameters by the kink of IP address used. Setting procedures are as
follows.
Start
N
Single network is
used.
Y
N
Free IP address
is used.
Y
Refer to IP address free
setting.
(1)
N
Free IP address
is used.
Y
Refer arbitrary setting.
Use default IP address of
EN module.
N
Integrated controller
standard setting is
used.
Y
Refer to class B (integrated
controller standard setting).
Use default IP address of
EN module.
N
Integrated controller
standard setting is
used.
Y
Refer to class B (integrated
controller standard setting).
Use dual network.
Go to (1)
Refer to TOSDIC-CIE
1200 setting.
Refer to TOSDIC-CIE
1200 setting.
model 2000 Ethernet Module Operation Manual