Toshiba V Series Operation Manual page 29

There are two 4-bit DIP switches in the front and side panel of EN651 and EN661. Each
of switches for EN651 and EN661 is described in Table 3-3
Switch No. Name
Front 1
Panel
2
3
4
Side 1
Panel
2
3
4
Note: This mode is valid for EN651 only. (Not applicable to EN661 dual systems. If this
mode is used, it is valid for line A only, provided that a single socket interface is
employed.)
Switch No. Name
1
2
3
4
5
6
7
8
6F8C0879
Table 3-3 Operation Mode Setting Table (EN651, EN661)
Function
DL Download
IPF IP address restriction
(Note)
IP0 IP address type
IP1
M0 Operation mode
M1
SEL Spare 0
GW Relay function (future)
Table 3-4 Operation Mode Setting Table (EN651A)
Function
M0 Operation mode
M1
SL Debug
GW Relay function (future)
S0 Spare 0
IPF IP address restriction
IP0 IP address type
IP1
Setting
on:Download
on : Free, off : Restricted
IP1 IP0 Operation
off off Class B (General)
off on Reserve
on off TOSDIC-CIE 1200
on on Set from tool
M1 M0 Operation
off off Normal
off on Reserve
on off Reserve
on on Memory clearance
Reserve
on : Provided, off : None
Setting
M1 M0 Operation
off off Normal
off on Download
on off Test program
on on Reserve
on : WDT invalid, off : WDT valid
on : Provided, off : None
Unused
on : Free, off : Restricted
IP1 IP0 Operation
off off Class B (General)
off on Reserve
on off TOSDIC-CIE 1200
on on Set from tool
3.1 Switch Setting
Default
(Before
shipment)
3
off
off
IP1=off
IP0=off
(Class B
setting)
M1=off
M0=off
(Normal setting)
Default
(Before
shipment)
M1=off
M0=off
(Normal setting)
off
off
off
off
IP1=off
IP0=off
(Class B
setting)
17