Master Card Function; Registration Mode; Registration Mode Function; User Card Registration - IDTECK Star FINGER006 User Manual

n should be performed by authorized person only.
1.3

Master Card Function.

The Master Card is used to toggle the FGR006 between the Reader Mode and the Registrati
on Mode.
※ For example,
If you present the master card in the Reader Mode, the FGR006 shifts to the Registration M
ode.
If you present the master card in the Registration Mode, the FGR006 shifts to the Reader M
ode.
2

Registration Mode

2.1

Registration Mode Function

In the Registration Mode, you can register new user cards or delete registered user cards.
If you present a registered user card, it will be removed from the FGR006. (4 beeps)
If you present an unregistered user card, it will be newly registered to the FGR006. (3 beeps)
2.2

User Card Registration.

RF + FINGER MODE:

After presenting the user card you'd like to register, you should enter the desired fingerprint
twice. Follow the steps below to register a new user card;
1. Present the designated card to the FGR006.
2. When the red light is turned on from the fingerprint scanner, place the fingerprint on it.
When the red light is turned off, remove the fingerprint. When the red light is turned o
n again from the fingerprint scanner, place the fingerprint on it one more time. (Refer t
o the figure below 'Correct placement of fingerprint')
3. You can hear 3 beeps if the registration is successfully completed, or 2 beeps if the regi
stration is not successful.
Registration Mode p.26