IDTECK Star FINGER006 User Manual page 13

Communication
Baud Rate
Input Port
Output Port
LED Indicator / Beeper
Operating Temperature
Operating Humidity
Color / Material
Weight /
Dimension (W x H x T)
Certification
Finger Module Specification
●
Resolution
Capture Image Size
Extraction Image Size
Sensing Area
Scanner
FAR(False Acceptance Ratio)
FRR(False Reject Ratio)
ESD(Electro Static Discharge)
Verification Time
Identification
(4/8bit Burst for PIN, 34bit Wiegand, ABA Track II)
RS232 / RS422 / RS485 (Max.255ch)
TCP/IP (External LAN Converter Required)
9,600bps (Recommended) /
4,800bps, 19,200bps and 38,400bps (Selectable)
3 ports (LED Control In,
Buzzer Control In, Tamper Switch)
3 ports (Error Signal Out,
OK Signal Out, Tamper Switch Out (Open Collector Out
put))
3 LED Indicators (Red and Green) /
Piezo Buzzer
-20 to +60C (-4 to +140F)
Fingerprint Mo
dule
-35 to + 65C (-31 to +149F)
RF Reader
10% to 90% relative humidity non-condensing
Pearl Dark Gray and Light Gray / Polycarbonate
259.5g (0.57lbs) /
66mm x 129mm x 52mm (2.6" x 5.1" x 2.0")
FCC, CE, KC
500dpi
356 X 292 pixels
248 X 292 pixels
12.7 X 14.9mm
High Quality Optical Sensor
0.001%
0.1%
15KV
Less than 1sec.
Less than 2sec.
p.8