Wiring; Power Connections; Input Connection; Output Connections - IDTECK Star FINGER006 User Manual

4

Wiring

4.1

Power Connections

1. Connect +12V(+) wire of Power Supply to Red wire of FGR006
2. Connect GND(-) wire of Power Supply to Black wire of FGR006
* Even in case of using external power, you MUST connect GND(-).
4.2

Input Connection

The Green LED is turned on if the LED Control Input(Blue with White stripe) wire is conn
●
ected to the GND.
A beep is generated if the Beeper Control Input(White with Red stripe) wire is connecte
●
d to the GND.
4.3

Output Connections

p.19 Installation of the Product