Leds; The Wps/Reset Button - ZyXEL Communications NBG-418N v2 User Manual

1.3 L EDs
Fig ure 2
Front Panel
The following table describes the LEDs and the WPS button.
Table 1 Front Panel LEDs and WPS Button
L ED
POWER
WAN
WLAN
WPS
1.4 T he WPS/ RESET Butto n
Your NBG-418N v2 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Each WPS connection works between two devices. Both devices must
support WPS (check each device's documentation to make sure).
Chapter 1 Introduction
C O L O R ST AT US
Green On
Off
Green On
Blinking
Off
Green On
Blinking
Off
Green On
Blinking
Off
NBG-418N v2 User's Guide
DESC RIPT IO N
The NBG-418N v2 is receiving power and functioning properly.
The NBG-418N v2 is not receiving power.
The NBG-418N v2 has a successful 10/100MB WAN connection.
The NBG-418N v2 is sending/receiving data through the WAN.
The WAN connection is not ready, or has failed.
The NBG-418N v2 is ready, but is not sending/receiving data through
the wireless LAN.
The NBG-418N v2 is sending/receiving data through the wireless LAN.
The NBG-418N v2 is negotiating a WPS connection with a wireless
client.
The wireless LAN is not ready or has failed.
WPS status is configured.
The NBG-418N v2 is negotiating a WPS connection with a wireless
client.
The WPS status is not configured or disabled.
13