Using The Wps/Reset Button; Wall Mounting - ZyXEL Communications NBG-418N v2 User Manual

Depending on the devices you have, you can either press a button (recommended) on the device
itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that allows one
device to authenticate the other) in each of the two devices. When WPS is activated on a device, it has
two minutes to find another device that also has WPS activated. Then, the two devices connect and set
up a secure network by themselves.
WPS/ RESET
The
1.4.1 Using the WPS/ RESET Butto n
Make sure the power LED is on.
1
Press the WPS/ RESET
2
WPS/ RESET
Press the
3
factory-default configurations.
For more information on using
1.5 Wa ll Mo unting
You may need screw anchors if mounting on a concrete or brick wall.
Table 2 Wall Mounting Information
Distance between holes
M4 Screws
Screw anchors (optional)
Select a position free of obstructions on a wall strong enough to hold the weight of the device.
1
Mark two holes on the wall at the appropriate distance apart for the screws.
2
Be c a re ful to a vo id da m a g ing pipe s o r c a b le s lo c a te d inside the wa ll
whe n drilling ho le s fo r the sc re ws.
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the full
3
depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way in - leave
a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the screws all
the way in - leave a gap of about 0.5 cm.
Make sure the screws are fastened well enough to hold the weight of the NBG-418N v2 with the
4
connection cables.
Align the holes on the back of the NBG-418N v2 with the screws on the wall. Hang the NBG-418N v2 on
5
the screws.
Chapter 1 Introduction
single button is located at the back panel of the NBG-418N v2.
button within 3 seconds to turn on the WPS function
button for longer than 10 seconds to restart/reboot the NBG-418N v2 back to its
WPS/ RESET
NBG-418N v2 User's Guide
, see Section 5.3 on page
10.50 cm
Two
Two
14
46.