ZyXEL Communications NBG-418N v2 User Manual page 37

Fig ure 25
Status Screen (AP Mode)
The following table describes the labels shown in the
Table 12 Status Screen (AP Mode)
L ABEL
Device Information
System Name
Firmware Version
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP Server
WLAN Information
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
System Status
Chapter 4 Modes
DESC RIPT IO N
Syste m Na m e
This is the you enter in the
identification purposes.
This is the current firmware version of the NBG-418N v2.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP server status.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN -
This shows a descriptive name used to identify the NBG-418N v2 in the wireless LAN.
This shows the channel number which you select manually or the NBG-418N v2
automatically scans and selects.
This shows the channel number which the NBG-418N v2 is currently using over the
wireless LAN.
This shows the level of wireless security the NBG-418N v2 is using.
This shows the IEEE 802.11 standard that the NBG-418N v2 supports. Wireless clients must
support the same standard in order to be able to connect to the NBG-418N v2
This shows the WPS (WiFi Protected Setup) Status. Click the status to display
Wire le ss L AN WPS
> screen.
NBG-418N v2 User's Guide
37
Sta tus screen.
Ma inte na nc e Syste m
>
O n , O ff , or
G e ne ra l
> screen. It is for
O ff b y sc he dule r .
Ne two rk
>