Ds-Lite; Advanced Screen - ZyXEL Communications NBG-418N v2 User Manual

Table 33 Network > WAN > Internet Connection: PPTP Encapsulation (continued)
L ABEL
Set WAN MAC
Address
Apply
Reset
7.3.4 DS- L ite
Use Dual Stack Lite when local network computers use IPv4 and the ISP has an IPv6 network. The NBG-
418N v2 tunnels IPv4 packets inside IPv6 encapsulation packets to the ISP's Address Family Transition
Router (AFTR) to connect to the IPv4 Internet. The local network can also use IPv6 services. The NBG-
418N v2 uses it's configured IPv6 WAN IP to route IPv6 traffic to the IPv6 Internet.
This screen displays when you select
Fig ure 59 Network > WAN > Internet Connection: DS-Lite
The following table describes the labels in this screen.
Table 34 Network > WAN > Internet Connection: DS-Lite
L ABEL
ISP Parameters for Internet Access
Connection
Type
DS-Lite Mode
AFTR Name or
Address
Apply
Reset
7.4 Adva nc e d Sc re e n
Use this screen to set up multicast configurations. Click
Chapter 7 WAN
DESC RIPT IO N
Select this option and enter the MAC address you want to use.
Click Apply to save your changes back to the NBG-418N v2.
Re se t
Click to begin configuring this screen afresh.
DS- L ite
DESC RIPT IO N
Select DS- L ite to tunnel IPv4 packets inside IPv6 encapsulation packets to the ISP's Address
Family Transition Router (AFTR) to connect to the IPv4 Internet when local network computers
use IPv4 and the ISP has an IPv6 network.
You can only set the IPv6 connection type to
the Ne two rk > WAN > IPv6 screen.
DS- L ite DHC Pv6
Select to obtain the AFTR information automatically using DHCPv6.
Select Ma nua l to configure the AFTR address manually.
Enter the domain name or IPv6 address of the Address Family Transition Router (AFTR).
Apply
Click to save your changes back to the NBG-418N v2.
Click Re se t to begin configuring this screen afresh.
NBG-418N v2 User's Guide
as the C o nne c tio n T ype .
Sta tic IPv6 ,
Ne two rk > WAN
83
SL AAC / DHC Pv6 or PPP o ve r Ethe rne t
> Adva nc e d .
in