ZyXEL Communications NBG-418N v2 User Manual page 87

Fig ure 63
Network > WAN > IPv6 (SLAAC/DHCPv6)
The following table describes the labels in this screen.
Table 38 Network > WAN > IPv6 (SLAAC/DHCPv6)
L ABEL DESC RIPT IO N
IPv6 Connection Select
Type server.
IPv6 DNS Settings
Obtain DNS server Click the
address from your ISP's server.
automatically
Use the following Click
DNS address
Primary and Enter the first/second IPv6 DNS server address assigned by the ISP.
Secondary DNS
Address
LAN IPv6 Address Settings
Enable DHCP-PD Click
DHCP clients. The prefix is the part of the address that indicates the bits that have fixed
values or are the bits of the network identifier. Prefix is written in address/prefix-length
notation.
LAN IPv6 Address If you disable DHCP-PD, enter the IPv6 address for the LAN port in this field.
LAN IPv6 Link-Local This shows the IPv6 Link-local address in the LAN side. This is used by routers when
Address communicating with neighboring devices on the same link. It allows IPv6-capable devices
to communicate with each other in the LAN side.i
Address Autoconfiguration Settings
Enable Click
Autoconfiguration network address that are not managed by a DHCPv6 server.
Chapter 7 WAN
SL AAC / DHC Pv6 when your NBG-418N v2 requests an IPv6 address from the ISP's
O b ta in DNS se rve r a ddre ss a uto m a tic a lly
Use the fo llo wing DNS a ddre ss
Ena b le DHC P- PD (DHCP-Prefix delegation) to allow NBG-418N v2 assign prefixes to
Ena b le Auto c o nfig ura tio n
if you want the devices on your local area network to obtain
NBG-418N v2 User's Guide
87
radio button to get a DNS server address
radio button to use a fixed DNS address.