5.1 O ve rvie w
This chapter provides tutorials for your NBG-418N v2 as follows:
•
How to Connect to the Internet from an AP
•
Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
•
Enable and Configure Wireless Security without WPS on your NBG-418N v2
•
Using Multiple SSIDs on the NBG-418N v2
•
Using Bandwidth Management on the NBG-418N v2
5.2 Ho w to C o nne c t to the Inte rne t fro m a n AP
This section gives you an example of how to set up an access point (
B
in this example) for wireless communication.
Fig ure 31
Wireless AP Connection to the Internet
5.3 C o nfig ure Wire le ss Se c urity Using WPS o n b o th yo ur
NBG - 418N v2 a nd Wire le ss C lie nt
This section gives you an example of how to set up wireless network using WPS. This example uses the
NBG-418N v2 as the AP and NWD210N as the wireless client which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or
PCI card).
There are two WPS methods for creating a secure connection. This tutorial shows you how to do both.
Push Butto n C o nfig ura tio n (PBC )
•
Section 5.3.1 on page
B
- create a secure wireless network simply by pressing a button. See
47.This is the easier method.
NBG-418N v2 User's Guide
C
HA PTER
B
can access the Internet through the AP wirelessly.
AP
46
T uto ria ls
AP
) and wireless client (a notebook,
5